When an inverter AC develops a PCB or compressor fault, the first question is usually about cost. Is it worth repairing, or would a new AC make more sense? This guide breaks down typical prices for AC PCB repair in Ulwe and compressor work at Airenza Aircon, and explains how to decide.
PCB Repair: From ?1,500
Airenza repairs inverter AC PCBs at chip level from ?1,500 on most inverter boards. The service includes board testing, component replacement and a repair warranty. A PCB repair is usually much cheaper than a new board and is worth it on most inverter ACs.
Capacitor or Relay: From ?699
Many cases where the compressor will not start are solved with a capacitor or relay. This repair starts at ?699, including the standard part, and covers diagnosis, part replacement and a running test.
Compressor Replacement: From ?6,500 Plus Compressor
Compressor replacement is the costliest repair. Labour, vacuuming and gas charging start at ?6,500. The compressor itself is charged separately because its price depends on the brand and capacity. The service includes compressor fitting, vacuum and gas charge, and a performance test.
When Is Compressor Replacement Worth It?
According to Airenza, it makes sense on an AC that is less than 8 to 10 years old and otherwise in good shape. On an old, non-inverter AC, the technician compares the repair cost with the price of a new AC so you can decide.
Why Testing Saves Money
A compressor that hums but does not start is often a weak capacitor or relay, not a dead compressor. Testing the capacitor, compressor windings and current draw before suggesting a replacement can save thousands of rupees.
Why a New Board Is Not Always the Answer
A new PCB from the company can be expensive and is sometimes out of stock. Chip-level repair replaces only the faulty components on the existing board, which is faster and cheaper in most cases.
What Causes These Faults?
Power cuts, voltage spikes and moisture, all common in Navi Mumbai, can damage PCB components. Heat and voltage stress also weaken capacitors over time.
Prices at a Glance
- PCB repair: from ?1,500
- Capacitor or relay: from ?699
- Compressor replacement: from ?6,500 plus compressor
- Estimate before any work
Questions to Ask Before Approving a Repair
- What exactly has failed?
- Can the board be repaired instead of replaced?
- Is there a warranty on the work?
- How old is the AC, and is the rest of it in good shape?
- What would a new AC cost by comparison?
The Repair Process
You call or WhatsApp with the AC type and problem. The technician visits, inspects the unit and explains the fault. You approve the estimate, and work starts only after your OK. The AC is tested after the repair and handed over with a bill.
A Simple Way to Decide
If the repair is a PCB or capacitor fix on a reasonably new inverter AC, repair is almost always worth it. If the compressor has failed on an old non-inverter unit, compare the full repair cost with a new AC before deciding. An honest technician will show you both numbers.
A Note on Old Parts
If a part is replaced, the old one can be shown to you, so you know exactly what failed and why it was changed.
About Airenza Aircon
Airenza Aircon works from a shop at Sector 17, Ulwe, Navi Mumbai, and has been in the AC business since 2003. The team is open 24x7, works on all major brands and covers 18 areas of Navi Mumbai, including Ulwe, Kharghar, Panvel, New Panvel, Nerul, Seawoods, Dronagiri, Uran, CBD Belapur, Kamothe, Kalamboli, Taloja, Vashi and Airoli. You can call or WhatsApp +91 91370 12430 to book a technician.
Final Thoughts
PCB and compressor faults can sound expensive, but many are fixed for much less than people expect. Chip-level PCB repair from ?1,500 and capacitor fixes from ?699 cover a large share of cases. For bigger compressor jobs, a clear comparison with a new AC helps you make the right financial choice.
Comments